FREE TOOL / SPACE RECORD

Make room for the whole routine.

Check side-by-side reservations for a brewer, optional grinder and work strip, including entered rear and overhead access.

A geometric fit is NOT approval to operate an appliance there. Check full manufacturer instructions for placement, heat, steam, electricity and access. Unknown access fields are deliberately blank; zero must be a value you have established.

The interactive planner needs JavaScript. On paper, add the side-by-side widths and gaps; compare the greatest equipment depth plus rear reservation and front margin with counter depth. Compare each equipment height plus overhead reservation with available height. Follow actual appliance instructions independently.

Switching units does not convert numbers. Re-enter all measurements in the chosen unit. Values below are fictional examples, not product presets.

01 / Available space

Counter width (in)

Usable depth (in)

Height to lowest obstruction (in)

02 / Brewer reservation

Width (in)

Depth (in)

Height (in)

Extra rear / depth access (in)

Extra overhead access (in)

Include a separate grinder

03 / Grinder reservation

Width (in)

Depth (in)

Height (in)

Extra rear / depth access (in)

Extra overhead access (in)

Gap between equipment (in)

04 / Task space

Work-strip width (in)

Gap before work strip (in)

Reserved front margin (in)

A zero work width removes its gap. Side clearances must be included in your widths/gaps. No universal clearance values are supplied.

YOUR RECORDED GEOMETRY

Complete the access measurements

Nothing is uploaded or saved automatically. A diagram is not a fit certificate or operating instruction. Keep the full text record with it.

What this simple model checks

Three dimensions, kept separate

Width used = brewer width + optional grinder width and equipment gap + work-strip width and its gap. Depth used = the larger equipment depth including its rear reservation, plus the front margin. Height used = the greater equipment height including its overhead reservation.

What it does not simulate

No lid arcs, side movement, cord paths, electrical loads, steam, hot surfaces, mounting, supporting strength or human reach. The work strip uses the depth behind your entered front margin; check actual task objects separately. Rear reservations are simplified rectangles. A zero-spare result is only a geometric equality.

Missing information is not zero

Blank dimensions or access reservations prevent a completed result. The fictional example button supplies 2 in or 2 cm in each access field solely to demonstrate the arithmetic. It is not a recommendation for any appliance.